Hands for 1" or larger Shaft
-
1 3/4" Black Contemporary Hands for Hansen Clocks with 1"+ Shaft
1 3/4" Hand for 3 1/2" Dial Black Contemporary / Straight Clock Hands for Hansen Clocks with 1"+ Shaft These hands are designed to work with Hansen Movements made after 1975. They may work with older Hansen Movements. The holes in the hands depend on the length of the shaft. This hand is made for movements with a shaft length of 1" or longer. Shaft length is measured from the very tip to the... 1 3/4" Hand for 3 1/2" Dial Black Contemporary / Straight Clock Hands for Hansen... -
1 3/4" Gold Contemporary Hands for Hansen Clocks with 1"+ Shaft
Gold 1 3/4" Hand for 3 1/2" Dial Black Contemporary / Straight Clock Hands for Hansen Clocks with 1"+ Shaft These hands are designed to work with Hansen Movements made after 1975. They may work with older Hansen Movements. The holes in the hands depend on the length of the shaft. This hand is made for movements with a shaft length of 1" or longer. Shaft length is measured from the very tip to the... Gold 1 3/4" Hand for 3 1/2" Dial Black Contemporary / Straight Clock Hands for H... -
3" Contemporary Straight Hand Set
This hand set includes an 3" Minute and an 2" Hour hand from mounting hole to tip. The length of the tail on the minute hand is 1" and on the hour hand is 1" measured from the mounting hole to the end. These hands are designed to work with Hansen Movements made after 1975. They may work with older Hansen Movements. The holes in the hands depend on the length of the shaft. This hand is made for... This hand set includes an 3" Minute and an 2" Hour hand from mounting hole to ti... -
3 3/8" Taper Clock Hands for Hansen Clocks with a 1"+shaft
Black 3 3/8" for 6 3/4" Dial Taper Clock Hands for Hansen Clocks with a 1" + shaft These hands are designed to work with Hansen Movements made after 1975. They may work with older Hansen Movements. The holes in the hands depend on the length of the shaft. This hand is made for movements with a shaft length of 1" or longer. Shaft length is measured from the very tip to the front of the movement.... Black 3 3/8" for 6 3/4" Dial Taper Clock Hands for Hansen Clocks with a 1" + sha... -
4 1/8" Black Contemporary Hands for Hansen Clocks with 1"+ Shaft
4 1/8" Hand for 8 1/4" Dial Black Contemporary / Straight Clock Hands for Hansen Clocks with 1"+ Shaft These hands are designed to work with Hansen Movements made after 1975. They may work with older Hansen Movements. The holes in the hands depend on the length of the shaft. This hand is made for movements with a shaft length of 1" or longer. Shaft length is measured from the very tip to the... 4 1/8" Hand for 8 1/4" Dial Black Contemporary / Straight Clock Hands for Hansen... -
4 1/8" Gold Contemporary Hands for Hansen Clocks with 1"+ Shaft
4 1/8" Hand for 8 1/4" Dial Gold Contemporary / Straight Clock Hands for Hansen Clocks with 1"+ Shaft These hands are designed to work with Hansen Movements made after 1975. They may work with older Hansen Movements. The holes in the hands depend on the length of the shaft. This hand is made for movements with a shaft length of 1" or longer. Shaft length is measured from the very tip to the front... 4 1/8" Hand for 8 1/4" Dial Gold Contemporary / Straight Clock Hands for Hansen ... -
4" Contemporary Straight Hand Set
This hand set includes an 4" Minute and an 3" Hour hand from mounting hole to tip. The length of the tail on the minute hand is 1" and on the hour hand is 1" measured from the mounting hole to the end. These hands are designed to work with Hansen Movements made after 1975. They may work with older Hansen Movements. The holes in the hands depend on the length of the shaft. This hand is made for... This hand set includes an 4" Minute and an 3" Hour hand from mounting hole to ti... -
5" Contemporary Straight Hand Set
This hand set includes an 5" Minute and an 3 3/4" Hour hand from mounting hole to tip. The length of the tail on the minute hand is 1" and on the hour hand is 1" measured from the mounting hole to the end. These hands are designed to work with Hansen Movements made after 1975. They may work with older Hansen Movements. The holes in the hands depend on the length of the shaft. This hand is made... This hand set includes an 5" Minute and an 3 3/4" Hour hand from mounting hole t... -
6" Black Contemporary Hands for Hansen Clocks with 1"+ Shaft
6" Hand for 12" Dial Black Contemporary / Straight Clock Hands for Hansen Clocks with 1"+ Shaft These hands are designed to work with Hansen Movements made after 1975. They may work with older Hansen Movements. The holes in the hands depend on the length of the shaft. This hand is made for movements with a shaft length of 1" or longer. Shaft length is measured from the very tip to the front of... 6" Hand for 12" Dial Black Contemporary / Straight Clock Hands for Hansen Clocks... -
6 1/4" Contemporary Straight Hand Set
This hand set includes an 6 1/4" Minute and an 4 3/4" Hour hand from mounting hole to tip. The length of the tail on the minute hand is 1" and on the hour hand is 1" measured from the mounting hole to the end. These hands are designed to work with Hansen Movements made after 1975. They may work with older Hansen Movements. The holes in the hands depend on the length of the shaft. This hand is... This hand set includes an 6 1/4" Minute and an 4 3/4" Hour hand from mounting ho... -
6 1/4" Teardrop Taper Hand Set
This hand set includes an 6 1/4" Minute and an 4 1/4" Hour hand from mounting hole to tip. The length of the tail on the minute hand is 1 3/4" and on the hour hand is 1 1/8" measured from the mounting hole to the end. These hands are designed to work with Hansen Movements made after 1975. They may work with older Hansen Movements. The holes in the hands depend on the length of the shaft. This... This hand set includes an 6 1/4" Minute and an 4 1/4" Hour hand from mounting ho... -
7" Spade (No Tail) Hansen Clock Hands for 1"+ shaft
7" Spade (No Tail) Hansen Clock Hands for 1"+ shaft These hands are designed to work with Hansen Movements made after 1975. They may work with older Hansen Movements. The holes in the hands depend on the length of the shaft. This hand is made for movements with a shaft length of 1" or longer. Shaft length is measured from the very tip to the front of the movement. Optional second hand is... 7" Spade (No Tail) Hansen Clock Hands for 1"+ shaft These hands are designed to ... -
8" Spade (No Tail) Hansen Clock hands for 1"+ shaft
8" Spade (No Tail) Hansen Clock hands for 1"+ shaft. These hands are designed to work with Hansen Movements made after 1975. They may work with older Hansen Movements. The holes in the hands depend on the length of the shaft. This hand is made for movements with a shaft length of 1" or longer. Shaft length is measured from the very tip to the front of the movement. Optional second hand is... 8" Spade (No Tail) Hansen Clock hands for 1"+ shaft. These hands are designed to... -
8" Spade Hand Set
This hand set includes an 8" Minute and an 6" Hour hand from mounting hole to tip. This hand does not have a tail. These hands are designed to work with Hansen Movements made after 1975. They may work with older Hansen Movements. The holes in the hands depend on the length of the shaft. This hand is made for movements with a shaft length of 1" or longer. Shaft length is measured from the very tip... This hand set includes an 8" Minute and an 6" Hour hand from mounting hole to ti... -
11' Tapered Hand Set
This hand set includes an 11" Minute and an 8" Hour hand from mounting hole to tip. This measurement does not include the length of the tail. The tail on these hands are 5 1/8" on the minute hand and 4" on the hour hand from mounting hole to end. These hands are designed to work with Hansen Movements made after 1975. They may work with older Hansen Movements. The holes in the hands depend on the... This hand set includes an 11" Minute and an 8" Hour hand from mounting hole to t... -
14 1/4" Diamond (20 3/4" including tail) Hansen Clock hands
14 1/4" Diamond (20 3/4" including Tail) Hansen Synchron Clock hands with counter weight on tail of minute hand. Minute hand is 14 1/4" from hole to tip, 20 3/4" including tail. Tail has a counter weight built in it. Hour hand is 11 to hole. Hands are metal. Black color. REQUIRES Synchron Clock movement with 1" or larger length shaft!!!! This set of hands is not setup for use with Quartz clock... 14 1/4" Diamond (20 3/4" including Tail) Hansen Synchron Clock hands with counte... -
17 1/2" Spade (22 1/2" including tail) Hansen Clock hands
17 1/2" Spade (22 1/2" including Tail) Hansen Synchron Clock hands with counter weight on tail of minute hand. Minute hand is 17 1/2" from hole to tip, 22 1/2" including tail. Tail has a counter weight built in it. Hour hand is 13 to hole, 18 total length. Hands are metal. Black color. REQUIRES Synchron Clock movement with 1" or larger length shaft!!!! This set of hands is not setup for use with... 17 1/2" Spade (22 1/2" including Tail) Hansen Synchron Clock hands with counter ...