Hansen Clock Movement with Motor

33-22 Hansen Type "c" Electric Movement 7/8" shaft, Rear Set SURFACE MOUNT #812162 / 812612 Hansen heavy duty brass electric moevement with rear set. Shaft length is measured from top of brass plate to tip of shaft. Please click here to see picture for example. This unit comes in other shaft lengths or center mount in our other listings. This movement unit will have 33-22 stamped on the brass plate. Please click here to see picture for example. This unit will have the rod to set the time coming out of the back of the bottom brass plate. Please click here to see example. This unit will have a 1 rpm 110v 60c motor that will have A43ra-6 stamped around the side of the canister. Please click here to see picture for example. This unit will be a surface mount unit. Size: 3"w x 3 1/4"H x 2 1/8"D To see how to get these measurements please click the appropriate following dimension to see a picture of how we got this measurement: W - Width         H - Height         d - Depth

This unit is Center Mount If you are unsure how to tell the difference please see our help section. Type D Movement - Synchron synchronous motor clock movements provide for a sweep second-hand and split-second accuracy for either consumer, industrial or laboratory clocks and time keeping applications. The "D" movement uses aluminum plates for a simple clock movement with smooth continuous running. These precision electric movements are designed and built to give sustained split-second accuracy in clocks ranging from the daintiest bedroom style to glass display clocks up to 26 inches (660 mm) in diameter. Center shaft overall length 1 3/8" This unit is Center Mount Possible replacement for a 33-264 or 33-119